MECHANICS OF FIBROUS COMPOSITES
by
CARL T. HERAKOVICH
JOHN WILEY & SONS, INC., 1998
CORRECTIONS
  1. Page 30, Table 2.2, x1' missing from column heading.
  2. Page 63, Section 3.5.5, line 3, delete  C66 = C55.
  3. Page 85, equation (4.37) has been expanded to improve clarity. The modified equation follows:

  4. Page 85, Fig. 4.3, Off-Axis Lamina sketch modified to show fibers. 
  5. Page 91, line between equations (4.60) and (4.61), change (4.55) to (4.45).
  6. Page 95, Fig. 4.13, fibers rotated 90° for correct direction.
  7. Page 112, Fig. 5.1, change thetak to -thetak.
  8. Page 162, Fig. 5.26. Change kappax under SHEAR to gammaxyo
  9. Page 166, line 1, change [Q]k to [Q]k
  10. Page 183, Exercise 5.14, change last sentence to: Compute results for a T300/5208  [0/+-45/90]s laminate.
  11. Page 184, Exercise 5.27, add the line: As examples, calculate {NT} and {MT} for the three laminates of Exercise 5.25 for a temperature change DeltaT = -180o F if the material is T300/5208 carbon/epoxy.
  12. Page 199, Equation 6.34, change h/l to l/h.
  13. Page 229, Fig. 7.8, the line tangent to the initial slope of the [08] response is misaligned.  The correct figure is:
  14. Page 231, Fig. 7.10, in the legend, change epsilony to -epsilony. 
  15. Page 235, Fig. &.14, the symbols for the test results are reversed. The correct figure follows:
    FIGURE 7.14 Axial Modulus Comparisons-C6000/PMR15

  16. Page 235, Fig. 7.15, the symbols for the test results are reversed. The correct figures follows:




  17. Page 286, Fig. 8.25a & b, and page 290, Fig. 8.29a & b, change x2/h to x2/b. 

  18. Page 304, line6. Change bucking to buckling.

  19. Page, 309, Fig. 9.4, The fiber orientations are 90o out of phase.  The correct figure follows. 

  20. Page 311, Fig. 9.7, the fiber orientation is incorrect. The correct figure follows:

  21. Starting on page 344, Figs. 9.31-9.36, 9.38-9.40, 9.42 and 9.43. correct Ladeveze and Le Dantec reference to 1992. 

  22. Page 3.57, Fig. 9.41, change 1991 in reference to "private communication". 

  23. Page 373, equation (10.64) is mising some upper and lower limits. The correct equation is:

  24. Page 385, Table 10.1 has been modified to give normalized radial displacements and two signs were corrected. The revised table is given below.

  25. Page 388,  Fig. 10.11,  5208 is missing from the T300/5208 in the legend.

  26. Page 405, 3rd line from bottom, change sigmax to sigma1.

  27. Page 414, equations (11.35) and (11.36) are missing a volume term. The correct equations are:


  28. Page 414, the subscripts on the strain term in equation (11.37) are incorrect . The correct equation is:

  29. Page 425, Fig. 11.15 is mislabeled. The correct figure follows

  30. Page 426, equation (11.107) is missing a superscript. The correct equation follows:

  31. Page 427, equation (11.111) is missing two superscripts and the wrong font is used for psi in the last term. The correct equation is provided.

  32. Page 431, equations (11.137) and (11.138) have incorrect subscripts. The correct equations are

     

  33. Page 431, the reference to equation (11.138) in the last line of text should refer to equation (11.137).

  34. Page 433, line 3 move the bar from 11 to epsilon.

  35. Page 434, equation (11.169). The e in the subscript ijkel on C should be deleted .The correct equation is:

  36. Page 439, table 11.2. The subscripts are incorrect on the shear moduli and Poisson's ratio. The correct table is:

  37. Page 453.Delete the second line, Aboudi, Z. 402, in the author Index.